Manual and Automatic Die Cutting and Creasing Machine

Manual and Automatic Die Cutting and Creasing Machine

  • Requirements:
Design Device QMY1200
(SZ1200)
QMY1300
(SZ1300)
QMY1500
(SZ1500)
Max. Paper Size  mm 1200*780 1300X960 1500X1100
Min. Paper Dimension mm 350*350 400X410 500X440
Max. Die-chopping Dimension mm 1180*760 1280X940 1480X1080
Max. Speed sh/h -5500 -5500 -4500
Max. Working Pressure T 300 three hundred three hundred
Cardboard sheet thickness gsm 250-800 250-800 250-800
 Corrugate sheet  Thickness mm one-seven 1-7 one-7
Die-chopping Precision mm ±0.five ±0.5 ±0.5
Total Electrical power KW 22.five 22.five 27.five
Complete Weight kg 13500 15000 18000
Total Dimension mm 7000*4000*2250 7750*4100*2245 8400*4600*2245

  Attributes of the equipment:
  Major Features:

  • The Bobst type minimize construction makes the slicing system movement like a scissor, it will understand a complete and simpler lower.
  • Primary worm gear uses alloy copper material, after the seasoned operator’s manual scraping treatment method and rigorous common tests, it can assures the driving areas ten several years daily life.
  • The principal chains undertake imported British Renold model, the differences of ten chains are much less than .2mm.
  • The hook up amongst gear box and driving shaft adopts sleeve and pin construction guaranteeing a robust link.
  • Speed:  

The equipment adopts frequency controller to achieve stepless velocity acceleration which can reach to 5000 times for every hour. During actual production, it can normally run at 3600 to 4200 moments for each hour in accordance to the good quality of the board. If the good quality of the paper is great, a excellent operator even can run the machine at maximum speed.

  • Security:

As it is proven in the image of the equipment, the machine adopts  automatic paper feeding approach which retains the operator absent from the die-reducing part. The mounting and adjustment of the die plate is also accomplished exterior of the die-chopping portion with sensors and detectors at die-slicing portion to make sure that the machine can not be started out when the die-reducing plate is at adjustment status.
 
In addition to the sensors at die-slicing part, there are sensor or technique switches at window element to make the total device at checking position to guarantee its basic safety.
 

  • Procedure comfort:

 

There is Male-device interface set up in the control panel which will displays the safety position of the machine as nicely as malfunctions to aid the operator. Digital camera is also put in in front of the operator for him/her to keep track of the procedure position at the supply portion.
 
Primary Constructions and Essential Material Utilized  
Four Major Big Elements: They are: bottom station, moving system, higher system and equipment wall. The base station is produced of gray solid iron -HT two hundred the transferring platform is ductile iron – QT 42-ten and the equipment wall is high quality A3 steel.

  • Main Push:

 

 
 
 
The eleven KW Siemens Motor together with the pneumatic clutch, worm shaft and worm equipment forms a relocating established to make sure stable pressure out put of not significantly less than 300 tons.
 
The content for the worm shaft is 40Cr with quenching treatment and equipment hardness HRC 45-50. the material for the worm is copper alloy – ZQAL9-4.
 
The bearing that is utilised is SKF. The bush is copper alloy ZQSn6-six-three.

  • Die-chopping and Creasing Element:

The travel is transferred through crank rod to pendulum which will carry the moving system to transfer up and down to achieve die-lower and creasing function.
The pendulum is manufactured of large high quality ductile iron. The pendulum axis is completed by induction harden with surface hardness HRC 43-48. The width of the pendulum is 250mm and diameter of pendulum shaft 70 mm – completely stick to the specification of 1080 sort automatic die-chopping and creasing device. Compared with automated die-reducing and creasing device which is utilised for cardboard die-slicing, this type of automated die-slicing and creasing machine is mainly utilized for corrugated board which demands much less strain for die-reducing, in this situation fairly some producers have made smaller width on the pendulum and smaller diameter on the pendulum shaft. We preserve broader pendulum and bigger diameter on its shaft to make our equipment previous for a more time lifestyle.
The die-chopping plate employs seven mm seventy five Crl plate which has far more hardness and existence span than the manganese plate.  
 

  • Board Conveying:

It adopts 3-cam intermittent positioning device to guarantee the boarding conveying correct and secure.

 
The machine employs gripper bar sort with 12A extended joints chain which is less in fat and significantly less shock to the intermittent device below the precondition to make certain the strength of the chain. The brand name of the chain is Renold U.K with large precise and quality. .    
 
The Gripper bar adopts aviation aluminum with three bridge type- gentle in weight and substantial in energy.
 

  • CZPT Component

The electrical areas are designed and assembled in accordance to the CZPTpean CE standard and utilizes world broad acknowledged model goods.
 

  • Set up of Die

The die mounting and dismounting adopts aspect withdrawing techniques which time saving and simple for operation.
There are two methods for the fixation of the die-possibly by bolt or clippers which are subject to customer’s guidance.  
The chase locking is pneumatic which is easy, practical and trustworthy.

  • Specific People of Our Machine:
  • Clever And Specific Entrance Lay Layout:

When compared with the card board sheet, the corrugated board has far more toughness. If the corrugated board abnormally reaches to the entrance lay, it will damage the entrance lay and the gripper bar when the front lay reaches to its optimum place.
 
CZPTly the producers will set up sensors on this portion to stop the device when the paper is fed abnormally to the front lay. Nonetheless, when the equipment is managing at the large pace, the inertia will carry the machine to run for a even though to make the entrance lay to its maximum level and then also injury the entrance lay and the gripper bar.
 
Our particular design is that when the abnormal board feeding transpires and currently being detected, the entrance lay can never reaches to its optimum level which tends to make free of charge from front lay and gripper bar damages since of abnormal paper feeding.
 
As it is our particular layout, so there is no photograph to be shown listed here.
 

  • Vehicle-Manual Switching Program

The Feeding program for this kind of machine can do car and manual. When the sheet shape is good, you can use auto-function. When the form of the sheet is not excellent, you can use handbook purpose and do sheet feeding manually.  
 
When the sheet is not good in shape,, you can open the rear beam and lift up the feeder to do guide feeding.  

  • Configurations:

 

Title Brand and Origin Remarks
CZPT SKF Swiss Crucial component
IKO Japan or HangCZPT, China Not crucial component
Chain Renold U.K Main Chain ( Discrepancy of significantly less than .2 mm for for each ten chains of machine chain length)
CHOHO Japan Other Chain are Choho Japan
Relay Omron Japan  
Contactor, buttons TELEMECANIQUE
France
 
Image CZPT Switch Fotek ZheJiang  
Stabilizer  MEANCZPT ZheJiang  
Variator Delta ZheJiang  
Major Motor Siemens Joint Enterprise
PLC Delta, ZheJiang  
Guy-equipment Interface Delta  
Pneumatic Elements Dawn, ZheJiang  
Rotary Joints SMC Japan  
Motor at feeding and shipping CPG ZheJiang  

 

  • Resources Package

 

Title Sum Specification
Minus Screw Driver 1 150
Additionally Screwdriver one 150
Monkey Wrench 1 300
Internal hexagon Spanner one established one.522.534568101214
Greasing Gun 1  
Oil Gun one  
Wrench One set twelve,fourteen/13,sixteen
Vise 1  
Triangular File 1  

 

  • Other Associated Info
  • The delivery time is 60-90 days following purchasing buy and thirty% down payment received .The delivery time differs since of the consumers requirement is distinct. 
  • The demand of set up, adjustment and air ticket is not incorporated in the value.
  • The subsidy of an engineer is $50.00 per day if set up support is required.
  • Payment: T/T or TT + LC
  • Shipment: suitable for the sea transportation.
  • Port of shipment: ZheJiang Port, China.
  • Expression of validity: 3 months

 
 
 

 

Manual and Automatic Die Cutting and Creasing Machine

TAGs:

Mill Chain

As one of the leading mill chain manufacturers, suppliers, and exporters of mechanical products, We offer mill chains and many other products.

Please contact us for details.

Manufacturer supplier exporter of the mill chain.

Recent Posts